uperfect monitor support

Můžete mít otázky týkající se používání našich přenosných monitorů nebo LapDocků při připojování k jiným zařízením, jako jsou notebooky, mobilní telefony, počítače, Macbooky atd. Pokuste se získat odpověď s odkazem na následující běžné dotazy.
Pokud to nepomůže, napište nám e-mail na adresu help@uperfectmonitor.com a my se vám do 24 hodin ozveme.

Questions When Connected To UPERFECT Portable Monitor

This article will help you troubleshoot the problem.

There are generally two ways to connect the portable display, and some models have three:

1. USB Type-C Connection. When your device has a USB Type-C port with Thunderbolt 3 or USB 3.1 or later (also called a full feature USB-C port or DP Alt Mode), it can directly connect to the monitor with one cable. Because the output power of some devices is limited, especially for HP computers, if the screen keeps flickering or showing No Signal, this means the power input is not sufficient. In this case, the display must also connect to an external power supply. The charger will be included in the package.

2. Connection through the HDMI interface. Considering the compatibility of different devices, an HDMI cable will also be included in the package. If the monitor has a standard HDMI port, you will get an HDMI to HDMI cable, and if it has a mini HDMI port, a mini HDMI to HDMI cable will be provided instead. HDMI connection needs an external power supply as it only supports signal transmission. A USB Type-C to USB Type-A cable will also be required if the monitor has a touch function. Connect the USB Type-C cable to the full feature Type-C port of the portable monitor and USB Type-A to the USB Type-A port of your laptop or other devices.

3. MINI DP interface connection. To meet the different needs of laptops, we reserve the mini DP port for some models. When it comes to the MINI DP interface connection, the connection method will be the same as the HDMI above.

Yes, when TYPE-C and HDMI are used for signal transmission connection at the same time, the signal source is usually switched by short pressing the power button.

The monitor needs a large current at the moment of turning on, at least 1.5A or more. When using the type-C to type-C function, the output current of some device interfaces is limited, and the output current does not meet the requirements for starting the monitor, so an external power supply is required to drive it. Especially 4K monitors, must have an external power supply to turn on.

1. The monitor is not connected to the power source or the power source is damaged. The indicator light of the monitor is on after the power is normally connected.

2. When using a USB-C to USB-C connection, the customer's device is not supported or incompatible.

3. HDMI no signal input: HDMI cable is damaged or poor contact.

Except for special models, you need to use the same screen cable when connecting with an Apple mobile phone.

You can refer to this: https://amzn.to/3uIJU07

Regarding the brightness, the black screen

1. The monitor needs an external power supply. When the power supply is insufficient, it will cause unstable use or black screen restart.

2.The wire is in poor contact or the wire is damaged.

3. For external interference, audio equipment and other equipment need to be moved away.

4. The screen refresh rate needs to be set to 60HZ in the computer.

1. After the menu is adjusted, the confirmation key is not pressed to confirm.

2. Regardless of whether HDMI is used to transmit signals or TYPE-C is used to transmit signals, the PD interface of the display needs to be connected to a power source when the menu is adjusted

1. Insufficient power supply, the monitor needs an external power supply.

2. Use non-original Type-c cable.

Except for Unify F15 and Unify S, other monitors are protected by the protocol of the MAC system, and the MacBook system version after 10.13 does not support the touch function.

Questions for your devices

If you have any questions about which equipment our products are suitable for, please check here.

Please check this link to find your answer

Or check on this site

Please click here to find the answer