UPERFECT Delta/Delta Lite Driver Installation Method

As the latest folding monitor, Delta has undoubtedly become the most eye-catching productivity-enhancing partner on the market.Because UPERFECT UStation Δ / Delta has two screens, it has different usage methods compared to ordinary portable monitors. How to install the driver is particularly important for those who already own a UPERFECT Δ / Delta folding screen monitor. This article aims to describe how to install the driver.

Delta Driver Installation Method

1. Please confirm if your device has a fully-featured type-c port first. If the device has a fully-featured type-c port, use a type-c cable to connect the device and display, and the monitor needs to be connected to an external power supply

2. After connecting the monitor to the device, open the following webpage and select a suitable driver based on your device system
Adress: https://www.synaptics.com/products/displaylink-graphics/downloads

For example: If your device system is Windows, you can click Windows and then click Download.

 

3.After downloading the driver, find the file location of the driver and install it.

4. After installing the driver, please restart the device, and then you can use both screens simultaneously. The driver only needs to be installed once, and the default display will be connected to the device and both screens will be turned on simultaneously.

Note: Use one type-c cable to connect two screens at the same time, you need to choose the second type-c port on the left side of the monitor from bottom to top.

Delta Lite Driver Installation Method

1. Please confirm if your device has a fully-featured type-c port first:
A: If the device has a fully-featured type-c port, use a type-c cable to connect the device and display, and the monitor needs to be connected to an external power supply.
B: If the device does not have a fully functional type-c port, please use an HDMI cable to connect the device and then connect a type-c to type-a cable to the device. The monitor needs to be connected to an external power supply.

2. After connecting the device to the monitor, enter the computer disk and find "USB DISPLAY"

3. Open the disk "USB DISPLAY", find the "USBDisplay_Windows_V3.1.3.55", and then install this driver

4. After installing the driver, please restart the device, and then you can use both screens simultaneously. The driver only needs to be installed once, and the default display will be connected to the device and both screens will be turned on simultaneously.

 

 


laissez un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés